|
VHF Compact Synthesized FM
Portable Radio
The
new TK-370(N) "multi-feature" handhelds
from Kenwood will insure your group is well connected with features
like 32-channel memory capacity, built-in QT & DQT signaling and
convenient dialing functions.
Main Features:
Large
LCD display provides clear legibility under any lighting
conditions from bright sunshine to the dark of night (backlight
on). It also displays various icons showing current operating
status.
Tough,
lightweight and compact construction means the
TK-370(N) will provide long-lasting field life. And because they
meet U.S. MIL-STD 810 C/D/E standards covering shock, vibration,
humidity, dust, and rain, they will perform in even the toughest
conditions.
32-channel
capacity (semi-duplex) ensures plenty of room for
applications today and tomorrow. And once programmed,
users simply select channels with the convenient rotary encoder located
on the top of the radio.
Busy
channel lockout further improves channel management by
preventing transmit if another talk group is already on the air.
A
timeout timer limits the transmission time of the radio.
Settings include the time allowed for continuous transmit, the period
before the TOT alarm sounds, and the retransmit prohibit period and
associated time allowed for temporary receive. These help guard
against misuse or accidental key-ups.
Built-in
QT and DQT signaling segregates talk groups so users only hear
traffic from other co-channel users in their own group.
Selectable QT means the user can temporarily change the OT frequency
set for each channel.
Built-in
2-tone decoder offers a 2-tone paging code (selectable
between 288 - 1433.4 Hz) assignable to any channel. An incoming
message is signaled with audible and visible alerts.
DTMF
signaling adds another dimension to paging with 3- to
10-digit DTMF code combinations available. 3-digit ID plus 1-digit
group code SelCal and a 1 - to 5-digit status
code are also supported, is DTMF group calling.
Call
alert lets you know you were called with DT or
2-tone signaling.
DTMF
transpond transmits
a code telling the caller that your radio received their DTMF paging
signal.
Signaling
AND/OR logic works when using combinations of
signaling systems. Squelch is opened when either one, or all, signal requirements are met, depending on your
settings.
Convenient
dialing functions include Manual Dial, Auto-Dial, Redial and
Store & Send (display shows the input DTMF code before it is sent).
The
power saver feature automatically places the receiver in a
"sleep" mode for short intervals during periods of
inactivity.
Low
battery alert causes the red TX LED to
flash a warning when voltage drops below threshold.
Function
settings and frequencies can be rapidly and accurately
programmed - with easy-to-use drop-down menus and help screens -using
the optional KPG-27D software and KPG-22 programming interface cable.
Self-program
mode allows a technician to enter setup data
without a computer, including DTMF and channels.
The
vertical layered design, with the battery pack forming the entire back
of the unit and the transceiver components forming the front, is a
fresh departure from the conventional stacked design. This
approach results in a stronger chassis and a single PCB, and improves
the overall styling and appearance of the radio.
Programmable
power levels provide one of two settings (High/Low) for
each of the channels so the radio can be tailored for mixed transmit range requirements. Output levels can
be programmed at 5W/1 W on VHF and 4W/1 W on UHF.
Two
types of ANI - PTT ID and DIAL ID - send connect and
disconnect ID information. PTT ID is activated by the PTT, and DIAL ID by the dial keys. It is also
possible to individually set PTT ID as on or off for each channel.
Other
Features:
- The
dial key also functions as a D/A key, allowing users to add op
delete scan channels at any time to customize the scan list lop
temporary assign-ments or to avoid
nuisance traffic.
- The
talk around key switches the Radio to simplex made (non-repeater)
for close-in communications.
- Priority
scan
- 500 mW speaker audio output
- Built-in
speaker mic jack
- Space
for optional signaling boards. AUX switch turns Its function on and off.
- Wireless
or wired cloning (Requires lnterface
cable for wired cloning)
- "All
reset" function resets all function settings and frequencies.
Technical Specifications
Frequency
range: Type 1: 450-470 MHz / Type 2: 470-490
MHz / Type 3: 490-512 MHz
Number of Channels: 32
Channel spacing: 12.5 kHz KHz
Battery voltage: 7.5 V DC
Dimensions: (W x H x D) with 2-5/16 x 5-5/16 x 1-3/8 in.
with KNB-14 battery (58 x 135 x 32mm)
Weight (net) w/ KNB-14 battery & antenna: 0.97 lb (440
g)
Channel frequency spread: Type 1:
20 MHz / Type 2: 20 MHz / Type 3: 22 MHz
RF power output: 4W/1W
SmarTrunk
Compatible
|
